Load cells

Load cells presently manufactured by AEP transducers are included in the requisites of OIML R60 regulations (International Organization of Legal Metrology) which establishes all the tests (temperature, moisture, barometric pressure, etc...) to be passed by the product in order to be included in certain precision classes C1,C2,C3 …

Load cells ATEX certificate for zones 1 and 21 (gases and dust).

To ensure these requisites, AEP transducers has developed inside itself some direct-weight automatic equipment which were accredited by SIT in 1996 for model control according to this regulation.

Load cells are periodically checked by AEP technology Metrological Laboratory personnel who performs constant tests on series production, with an always careful view to the product continuous improvement.

Thanks to technical staff know-how,all the procedures to perform model approval for legal uses are being activated by autorithies in control.

*Type*	Nominal Load Class	Combined Error	*Characteristics*	*Data Sheet*
CBS LOW COST TYPE	250, 500 kg 1,2.5, 5, 7.5, 10, 15, 20 t 30, 50, 75, 100 t	0.030%	Compression Material: Stainless Steel Output: 2mV/V LASER welded EN 60529: IP68 ATEX certificate Zones 1 and 21 Zones 2 and 22	Data Sheet ATEX Certificate
C2S	100, 250, 500 kg 1,2.5, 5, 7.5, 10, 20 t 30, 50, 75, 100 t OIML R60: Class: C1, C2, C3	C1: 0.045% C2: 0.023% C3: 0.018%	Compression Material: Stainless Steel Output: 2mV/V LASER welded EN 60529: IP68 ATEX certificate Zones 1 and 21 Zones 2 and 22	Data Sheet ATEX Certificate
UPC WEIGHING UNIT	100, 250, 500 kg 1,2.5, 5, 7.5, 10 t 20t OIML R60: Class: C1, C2, C3	C1: 0.045% C2: 0.023% C3: 0.018%	Executed in: Stainless Steel AIS 304. Equipped with a system of: Auto-alignment. Compensation. Transversal sliding
TCA	1, 2, 5, 10, 25, 50 kg	0.03%	Compression Tension Material: Aluminium Output: 2mV/V EN 60529: IP20
TCE	350, 500 kg 1, 2.5, 5, 7.5 t 10, 20 t	0.03%	Compression Tension Material: Stainless Steel Output: 2mV/V LASER welded EN 60529: IP67 ATEX certificate Zones 1 and 21 Zones 2 and 22	Data Sheet ATEX Certificate
TS - TSA	25, 50 kg 100, 200, 300, 500 kg 1, 2, 2.5, 5, 7.5 t OIML R60: Class: C2, C3, C4	C2: 0.023% C3: 0.018% C4: 0.015%	Tension Material: Stainless Steel Output: 2mV/V LASER welded EN 60529: IP68 (25, 50kg IP65)	Data Sheet OIML Certificate ATEX Certificate
T20	5, 7.5, 10, 15, 20 t OIML R60: Class: C2, C3	C2: 0.023% C3: 0.019%	Tension Materiale: Stainless Steel Output: 2mV/V LASER welded EN 60529: IP658	Data Sheet ATEX Certificate
D100	20, 30, 50, 75, 100 t	0.10%	Tension Material: Stainless Steel Output: 2mV/V LASER welded EN 60529: IP65
F1	2.5, 5, 10, 20, 25, 50 kg 100, 200 kg OIML R60: Class: C2, C3	C2: 0.026% C3: 0.020%	Material: Stainless Steel Output: 2mV/V LASER welded EN 60529: IP67 ATEX certificate Zones 1 and 21 Zones 2 and 22	Data Sheet ATEX Certificate
F3	10, 25, 50, 100, 200, 500 kg 1, 1.5, 2 t OIML R60: Class: C2, C3	C2: 0.027% C3: 0.018%	Material: Stainless Steel Output: 2mV/V LASER welded EN 60529: IP67
FT1 - FT1A	350, 500 kg 1, 2, 3, 5, 7.5 t OIML R60: Class: C2, C3	C2: 0.024% C3: 0.018%	Material: Stainless Steel Output: 2mV/V LASER welded EN 60529: IP68 ATEX certificate Zones 1 and 21 Zones 2 and 22	Data Sheet OIML Certificate ATEX Certificate
UPFT1 WEIGHING UNIT with ELASTOMER	350, 500 kg 1, 2, 3, 5 t OIML R60: Class: C2, C3	C2: 0.024% C3: 0.018%	Executed in: Stainless Steel AIS 304.
FT2	500 kg 1, 2, 3, 5 t OIML R60: Class: C2, C3	C2: 0.024% C3: 0.018%	Material: Stainless Steel Output: 2mV/V LASER welded EN 60529: IP68 ATEX certificate Zones 1 and 21 Zones 2 and 22	Data Sheet ATEX Certificate
UPFT2 WEIGHING UNIT with ELASTOMER	500 kg 1, 2 t OIML R60: Class: C2, C3	C2: 0.024% C3: 0.018%	Executed in: Stainless Steel AIS 304.
FT5 OFF-CENTER (Platform size 400x400mm)	10, 20, 50, 100 kg	C2: 0.028%	Material: Stainless Steel Output: 2mV/V LASER welded EN 60529: IP67
CFR Load cell for the measurement of rolled sections tension (sheets, rubber, paper, fabric, etc...)	15, 25, 50, 100 kg	0.5%	Ball Bearings: 35x15 (SKF 1202) Output: 2mV/V EN 60529: IP40