Tel +39 059 346441 

Fax +39 059 346437

P.I. e C.F. 00680170362

*
  aep@aep.it 

HOME

 

Load Cells:

Load cells presently manufactured by AEP transducers are included in the requisites of OIML R60 regulations (International Organization of Legal Metrology) which establishes all the tests (temperature, moisture, barometric pressure, etc...) to be passed by the product in order to be included in certain precision classes C2, C3, C4 …

To ensure these requisites, AEP transducers has developed inside itself some direct-weight automatic equipment which were accredited by SIT in 1996 for model control according to this regulation.

Load cells are periodically checked by Metrological Laboratory personnel who performs constant tests on series production, with an always careful view to the product continuous improvement.

Thanks to technical staff know-how,all the procedures to perform model approval for legal uses are being activated by autorithies in control.

Load cells ATEX certificate for zones 1 and 21 (Gases and Dust).

 
Type Characteristics Doc.
MOD

WIRELESS
transmission can be applied to load
cells type:

C2S - CLS - D100
 T20 - TCE
CLS

Compression

Nominal Load from 30 to 500 t

Class (OIML R60): C1, C2

Combined Error: 0.045%, 0.023%

Material: Stainless Steel

Output: 2mV/V

LASER welded

Protection: IP68

CBS



 LOW COST TYPE



Compression

Nominal Load from 250 kg to 100 t

Linearity: 0.03%

Material: Stainless Steel

Output: 2mV/V

LASER welded

Protection: IP68

ATEX certificate (Zones 1 and 21)



C2S

Compression

 Nominal Load from 100 kg to 200 t

Class (OIML R60): C1, C2, C3

Combined Error: 0.045%, 0.023%, 0.018%

Material: Stainless Steel

Output: 2mV/V

LASER welded

Protection: IP68

ATEX certificate (Zones 1 and 21)



C2SAMP
Compression



 Nominal Load from 100 kg to 200 t

Linearità: 0.03%

Material: Stainless Steel

Output: 4-20mA, 5V, 10V

LASER welded

Protection: IP68

UPC



 Compression

WEIGHING UNIT

Nominal Load from 100 kg to 30 t

Executed in: Stainless Steel AISI 304.

Equipped with a system of:
Auto-alignment.
Transversal sliding
TCA

Compression
Tension 		Nominal Load from 1 to 50 kg

Linearity: 0.03%
Material: Aluminium

Output: 2mV/V

Protection: IP20

TCE



Compression
Tension

Nominal Load from 350 kg to 20t

Linearity: 0.03%

Material: Stainless Steel

Output: 2mV/V

LASER welded

Protection: IP67

ATEX certificate (Zones 1 and 21)



TCEAMP


Compression
Tension

 Nominal Load from 350 kg to 20t

Linearity: 0.03%

Material: Stainless Steel

Output: 4-20mA, 5Volt, 10Volt

LASER welded

Protection: IP67

TS
 TSA




Tension

Nominal Load from 10 kg to 7.5 t

Class (OIML R60): C2, C3, C4

Combined Error: 0.023%, 0.018%, 0.015%

Material: Stainless Steel

Output: 2mV/V

LASER welded

Protection: IP68 (10, 25, 50kg IP65)



TSAMP


Compression
Tension

 Nominal Load from 10 kg to 7.5 t

Linearity: 0.03%

Material: Stainless Steel

Output: 4-20mA, 5Volt, 10Volt

LASER welded

Protection: IP65

T20




Tension 		Nominal Load from 5 to 20 t

Class (OIML R60): C2, C3

Combined Error: 0.023%, 0.019% 

Materiale: Stainless Steel

Output: 2mV/V

LASER welded



D100

Tension		 Nominal Load from 20 to 100 t

Linarity: 0.10% 

Material: Stainless Steel

Output: 1mV/V

LASER welded

CLT

Compression
Tension

Nominal Load from 100 to 250 t

Linearity: 0.10%

 Material: Stainless Steel

Output: 2mV/V

LASER welded

Protection: IP65

F1
 Nominal Load from 2.5 to 200 kg

Class (OIML R60): C2, C3

Combined Error: 0.026%, 0.020% 

Material: Stainless Steel

Output: 2mV/V

LASER welded



F3
 Nominal Load from 10 kg to 2 t

Class (OIML R60): C2, C3

Combined Error: 0.027%, 0.018% 

Material: Stainless Steel

Output: 2mV/V

LASER welded

FT1
FT1A

Nominal Load from 350 kg to 7.5 t

Class (OIML R60): C2, C3

Combined Error: 0.024%, 0.018% 

Material: Stainless Steel

Output: 2mV/V

LASER welded



UPFT1

WEIGHING UNIT

Nominal Load from 350 kg to 5 t

Executed in: Stainless Steel AISI 304.

WITH ELASTOMER

 
FT2



Nominal Load from 500 kg to 5 t

Class (OIML R60): C2, C3

Combined Error: 0.024%, 0.018% 

Material: Stainless Steel

Output: 2mV/V

LASER welded

UPFT2

WEIGHING UNIT

Nominal Load from 500 kg to 2 t

Executed in: Stainless Steel AISI 304.

WITH ELASTOMER

FT6


OFF-CENTER (Platform size 400x400mm)

Nominal Load from 5 to 100 kg

Class (OIML R60): C2

Combined Error: 0.028% 

Material: Stainless Steel

Output: 2mV/V

LASER welded

 IP67